Table of Contents
Advertisement
Joystick Installation
1. Loosen the joystick bracket adjustment screw located under the armrest. See
figure 10.
2. Insert the joystick mounting tube into the joystick bracket under the armrest.
3. Adjust the position of the joystick to a comfortable spot.
4. Tighten the joystick adjustment screw to secure the joystick.
Figure 10
Note: The joystick may be installed on the left or right arm according to your preference.
Accessory Receiver
Installing an accessory:
1. Remove the plastic receiver plug by pulling it out.
2. Loosen the thumb screw and slide the accessory in until it stops. See figure 11.
3. Tighten the thumb screw to secure the accessory.
IV. ASSEMBLY
Speed
Setting
LED
Array
Speed
Setting
SLOWER
Figure 11
15
Top View of Joystick
Thumb Screw
Plastic Receiver Plug
Battery
Charge
LED
Array
On/Off
Button
Horn
Button
Speed
Setting
FASTER
Advertisement
Table of Contents
