Golden AlanteSPORT GP208 Owner's Manual page 13

IV. ASSEMBLY
Seat Installation
1. Fold the seat back down.
2. Grasp the seat firmly on each side, lift the seat and align the seat pin with the hole in
the seat post receiver. See figure 5.
Figure 5 Figure 6
3. While holding the seat lever up, insert the seat into the seat post. See figure 5.
4. Push down on the seat and release the lever. Try to move the seat from side to side
to make sure it is seated properly. Note: There should be no side to side movement if
installed properly.
Be sure the seat is correctly installed before operating your
power chair.
The seat arms can be removed to reduce the weight during assembly.
Headrest Installation
1. Align the headrest with the holes in the seat back.
2. Push in on the headrest clamp and push down on the headrest to insert it into the
seat back. See figure 6.
13