Table of Contents
Advertisement
Headrest Height Adjustment
1. Push and then release the clamp on the right hand post of the headrest while you are
pulling up or pushing down on the head rest. See figure 16.
2. The headrest will "click" to a stop in one of the preset positions.
3. Repeat step 1 until the headrest is at the desired height.
Backrest Angle Adjustment
1. Fold seat back down to access the adjustment bolt. See figure 17.
2. Remove the two screws securing the cover.
3. Loosen the jam nut with a 17mm wrench.
4. To increase the seat angle, turn the bolt clockwise with a 17mm wrench. To decrease
the seat angle, turn the bolt counter-clockwise with a 17mm wrench.
5. Tighten the jam nut with a 17mm wrench to secure the bolt.
6. Reinstall the cover.
7. Repeat steps 1-6 for the opposite side of the seat back.
Screws (2)
Cover
VI. COMFORT SETTINGS
Headrest Clamp
Figure 16
Figure 17
Bolt
Jam Nut
19
Advertisement
Table of Contents
