Table of Contents
Advertisement
CHARGING THE BATTERIES
Your Alanté Sport's charging system is designed for your safety and for your convenience.
Follow the steps below to recharge the batteries.
1. Position your Alanté Sport close to a standard wall electrical outlet.
2. Turn off the power on the joystick.
3. Insert the matching charger XLR plug into the joystick's charging socket that is
located at the front of the joystick. See Figure 29.
4. Insert the plug at the other end of the charger power cord into a standard
electrical wall outlet. (Power to the charger indicated by a red LED).
NOTE: MAKE SURE THE STANDARD ELECTRICAL OUTLET YOU ARE USING IS
NOT CONTROLLED BY A LIGHT SWITCH CAUSING THE CHARGER TO SHUT OFF
WHEN IT IS ACTIVATED.
5. Disconnect the charger power cord from the wall outlet and then from the joystick
charging socket when the batteries are fully charged.
indicated, when the charge LED turns green and all 10 joystick LEDs are lit when the
joystick is turned on.
VIII. BATTERY CHARGING
The batteries should be fully charged in eight hours. A full charge is
Charger XLR plug
Figure 29
33
Advertisement
Table of Contents
