Table of Contents
Advertisement
ask for help if you do not feel capable of safely lifting that much weight.
of arms will reduce the weight of the seat.
your power chair.
chair as they could inadvertently pull out of the receiver bar causing injury.
Arm and Seat Belt Installation
1. Remove the arm width adjustment screw from the arm receiver tube at the bottom
rear of the seat frame. See figure 8.
2. Insert the arm into the arm receiver tube, so that the arm pad faces toward the front
of the unit.
3. Adjust the width of the arm.
Figure 8
4. Insert the arm width adjustment screw through the seat belt anchor, and secure by
tightening the adjustment screw. See figure 9.
5. Repeat steps 1 – 4 for the opposite side.
IV. ASSEMBLY
The standard (18" x 18") seat assembly weighs 37 pounds. Please
Be sure the seat is correctly installed and locked before operating
Never pull on the arms or use them as a handle to move the power
14
Removal
Figure 9
Advertisement
Table of Contents
