Table of Contents
Advertisement
No.
Description
DIP switch.
● PD Alive: When terminal device crash is detected, power down and
● Extend Mode: Extends the maximum transmission distance to 250 m,
8
Another DIP switch.
Select Default or Extend Mode by dialing the DIP switch.
Extend Mode: Extends the maximum transmission distance to 250 m, but
reduces average transmission speed to 10 Mbps.
(Not included
in the figure)
In Extend Mode, the transmission distance of the PoE port is up to 250 m but
the transmission rate drops to 10 Mbps. The actual transmission distance
might vary due to power consumption of connected devices or the cable
type and status.
Uplink port speed indicator.
Speed
● On: 100 Mbps/1000 Mbps.
(Not included
in the figure)
● Off: 10 Mbps.
Figure 2-1 Front panel (with optical ports)
Following are all the ports and indicators on the front panel of the 8-port unmanaged desktop
switch (with optical ports), and might differ from the actual product.
Table 2-1 Description of front panel (with optical ports)
No.
Description
PoE port status indicator.
1
● On: Powered by PoE.
● Off: Not powered by PoE.
Single-port connection or data transmission status indicator (Link/Act).
● On: Connected to the Switch.
2
● Off: Not connected to the Switch.
● Flashes: Data transmission is in progress.
restart the terminal device.
but reduces average transmission speed to 10 Mbps.
In Extend Mode, the transmission distance of the PoE port is up to 250 m
but the transmission rate drops to 10 Mbps. The actual transmission
distance might vary due to power consumption of connected devices or
the cable type and status.
3
Advertisement
Table of Contents
