Table of Contents
Advertisement
No.
3
4
5
6
7
2.2 Rear Panel
The following figure is for reference only, and might differ from the actual product.
No.
1
2
Description
Uplink port data transmission status indicator (Up1/Up2).
● Flashes: Data transmission is in progress.
● Off: No data transmission.
Power indicator.
● On: Power on.
● Off: Power off.
Uplink port, 10/100/1000 Mbps self-adaptive electrical ports and 1000
Mbps optical ports.
10/100 Mbps or 10/100/1000 Mbps self-adaptive Ethernet ports.
DIP switch.
● PD Alive: When terminal device crash is detected, power down and
restart the terminal device.
● Extend Mode: Extends the maximum transmission distance to 250 m,
but reduces average transmission speed to 10 Mbps.
In Extend Mode, the transmission distance of the PoE port is up to 250
m but the transmission rate drops to 10 Mbps. The actual transmission
distance might vary due to power consumption of connected devices
or the cable type and status.
Figure 2-2 Rear panel
Table 2-2 Description of rear panel
Description
Ground terminal.
Available for certain models.
Lock hole. Used to lock the Switch.
Available for certain models.
4
Advertisement
Table of Contents
