16 Safety instructions
WARNING!
Use a grounding wristband when you handle printed circuit boards. Do not touch
the boards unnecessarily. The boards contain components sensitive to electrostatic
discharge.
Fiber optic cables
■
WARNING!
Obey these instructions. If you ignore them, equipment malfunction and damage
to the fiber optic cables can occur.
• Handle the fiber optic cables with care.
• When you unplug the cables, always hold the connector, not the cable itself.
• Do not touch the ends of the fibers with bare hands as the ends are extremely
sensitive to dirt.
• Do not bend the fiber optic cables too tightly. The minimum allowed bend radius
is 35 mm (1.4 in).