Motherboard Features - Supero AS-1010S-T User Manual

AS1010S-T User's Manual
1-2

Motherboard Features

At the heart of the 1010S-T lies the H8SSL-i, a single processor motherboard
designed to provide maximum performance. Below are the main features of
the H8SSL-i. (See Figure 1-1 for a block diagram of the ServerWorks HT-1000
chipset.)
Processors
The H8SSL-i has an 939-pin ZIF socket that supports a single AMD Opteron Series
100 processor. Please refer to the support section of our web site for a complete
listing of supported processors.
Memory
The H8SSL-i has four (4) 184-pin DIMM sockets that can support up to 4 GB of
unbuffered ECC DDR400/333 SDRAM. (Memory can operate in either single or
dual-channel mode.) Low-profi le memory modules are required for use in the 1U
form factor of the 1010S-T.
Serial ATA
A Serial ATA controller is incorporated into the ServerWorks HT-1000 chipset. The
Serial ATA drives in the 1010S-T are hot-swappable.
PCI Expansion Slots
The H8SSL-i has one 64-bit, 133 MHz (3.3V) PCI-X slot and two 32-bit, 33 MHz
(5V) PCI slots. When incorporated into the 1010S-T server system, a riser card
(CSE-RR1U-X) is included for use with the PCI-X slot to support one standard (full-
height, full-length) expansion card in the 133 MHz PCI-X slot.
Ethernet Ports
A Broadcom BCM5704 Ethernet controller is incorporated into the H8SSL-i to sup-
port two Gigabit LAN ports.
1-2