Supero AS-1010S-T User Manual page 79

HT1000 SouthBridge Confi guration
HIDE XIOAPIC PCI Functions
The options are Yes and No.
S-ATA Confi guration
HT-1000 S-ATA
Use this setting to Enable or Disable the on-chip SATA controller.
Port# to Boot From
Use this setting to select which port to boot from. Options are Port0, Port1,
Port2 and Port3.
S-ATA Mode
Use this select either IDE or MMIO as the SATA mode.
Banner Display
This setting is used to Enable or Disable the banner display.
INT13 Support
This setting is used to Enable or Disable the INT13 function.
ACPI Confi guration
Advanced ACPI Confi guration
ACPI Version Features
Select which version of ACPI you wish to use. Options are ACPI v. 1.0, ACPI
v. 2.0 and ACPI v. 3.0.
ACPI APIC Support
Select "Enabled" to allow the ACPI APIC Table Pointer to be included in the
RSDT pointer list. The options are Enabled and Disabled.
ACPI OEMB Table
This setting when enabled will include an OEMB table pointer to pointer lists.
Options are Enabled and Disabled.
7-9
Chapter 7: BIOS