Supero AS-1010S-T User Manual page 38

AS1010S-T User's Manual
Installing the Heatsink Retention Modules
One heatsink retention module (BKT-0005) and two screws are included in the retail
box. Once installed, these are used to help attach the heatsink to the CPU. To
install, position the module so that the CPU backplate standoffs insert through the
holes on the heatsink retention module and the four feet on the module contact the
motherboard. Secure the retention module to the backplate with the two screws
provided.
Note: BKT-0005 is included for use with third-party heatsinks only. When installing
proprietary heatsinks (SNK-P0012), only BKT-0004 (CPU backplate) is needed. The
BKT-0005 retention module was designed to provide compatibility with clip-and-cam
type heatsinks from third parties.
Figure 5-1. Removing the Air Shroud
5-4