Chapter 1: Introduction; Overview - Supero AS-1010S-T User Manual

Supermicro as-1010s-t servers: user guide
Table of Contents

Advertisement

1-1

Overview

The AS1010S-T is a single processor, mini 1U rackmount server comprised of two
main subsystems: the SC811FT-260 chassis and the H8SSL-i motherboard. The
H8SSL-i supports a single AMD Opteron 100 series processor in a 939-pin socket
and up to 4 GB of unbuffered DDR400/333 SDRAM memory. Please refer to our
web site for information on operating systems that have been certifi ed for use with
the 1010S-T and for regular updates on supported processor speeds.
In addition to the motherboard and chassis, various hardware components may
have been included with the 1010S-T, as listed below.
One (1) slim fl oppy drive [FPD-PNSC-02(01)]
One (1) slim CD-ROM drive [CDM-TEAC-24(B)]
Two (2) hot-swap SATA drive carriers [(CSE-PT10-(B)]
Two (2) SATA cables (CBL-0044)
One (1) SATA LED cable (CBL-0056)
One (1) air shroud (CSE-PT0113)
Two (2) 4-cm counter-rotating fans (FAN-0087)
One (1) SATA backplane (CSE-SATA-810)
One (1) CPU backplate (BKT-0004)
One (1) heatsink retention module with two (2) screws (BKT-0005)
One (1) PCI-X slot riser card (CSE-RR1U-X)
Rackmount hardware with screws (CSE-PT8)
Two (2) rack rail assemblies
Six (6) brackets for mounting the rack rails in a rack/telco rack
One (1) CD containing drivers and utilities
Chapter 1
Introduction
1-1

Chapter 1: Introduction

Advertisement

Table of Contents
loading

Table of Contents