Overview - Cisco Nexus 9508 Hardware Installation Manual

Aci-mode switch
Hide thumbs Also See for Nexus 9508:
Table of Contents

Advertisement

Overview

Overview
This switch chassis includes the following modules:
• Supervisor modules (one or two) in slots SUP 1 and SUP 2 (numbered from left to right on the chassis)
• System controllers (two) (N9K-SC-A) in slots SC 1 and SC 2 (numbered from left to right on the chassis)
• Line cards (up to eight) in slots LC 1 to LC 8 (numbered from top to bottom on the chassis) supported
Note
• Fabric modules in slots FM 1 to FM 6 (numbered from left to right on the chassis)
Overview, on page 1
by the same type of fabric module
For compatibility information, please refer to the
Do not mix ACI-mode line cards with NX-OS mode line cards in the same
switch.
See the following table for the compatibility of fabric modules, fans, and fabric module blanks or fan
power cards.
Table 1: Compatibility of Fabric Modules, Fans, and Fabric Module Blanks/Fan Power Cards
Fabric Module
N9K-C9508-FM
N9K-C9508-FM-E
N9K-C9508-FM-E2
N9K-C9508-FM-G
N9K-C9508-FM-R
C H A P T E R
Line Card and Fabric Module Compatibility
Fan
N9K-C9508-FAN
N9K-C9508-FAN
N9K-C9508-FAN
N9K-C9508-FAN2
N9K-C9508-FAN
Cisco Nexus 9508 ACI-Mode Switch Hardware Installation Guide
1
data sheets.
Fabric Module Blank or Fan
Power Card
N9K-C9508-FM-Z
N9K-C9508-FM-Z
N9K-C9508-FM-Z
N9K-C9508-FAN-PWR
N9K-C9508-FM-Z
1

Advertisement

Table of Contents
loading

Table of Contents