Cisco Nexus 9508 Hardware Installation Manual page 69

Aci-mode switch

Hide thumbs Also See for Nexus 9508:

Table of Contents

Replacing or Installing Modules, Fan Trays, and Power Supplies

Step 2

This procedure shows how to remove a blank line card in a line card slot:

a) Press the two latches on the sides of a blank line card using forefingers so that the blank line card is unlocked from

the brackets on the side of the chassis. Slightly pull out the blank line card.

Note

The latches are stiff and may require extra force to fully disengage with the brackets on the sides of the

chassis.

b) Hold the blank line card using both the hands and pull the blank line card completely out of the chassis slot.

Cisco Nexus 9508 ACI-Mode Switch Hardware Installation Guide

Installing and Removing a Blank Line Card

Table of Contents