Configuring Switch D Using The Web Configurator - ZyXEL Communications VES-1616 Support Notes

ZyXEL VES-1616/24FA-5x Series Support Notes
in the navigation panel to display the configuration screen.
Set ports 25, 26 and 27 as the "Tunnel Ports" and leave the SPVID fields to the
default settings.
9. You have finished setting Switch C for VLAN stacking for this network example.

Configuring Switch D Using the Web Configurator

1. Use an RJ-45 Ethernet cable to connect your computer to the MGMT port on
the switch.
2. By default, the IP address on the MGMT port is 192.168.0.1/24
3. Set your computer to use a static IP address in the same subnet (for example,
192.168.0.2/24).
4. Open a web browser (such as IE) and enter http://192.168.0.1 as the URL.
5. A login screen displays. Enter "admin" (the default) as the username and "1234"
(the default) as the password.
6. After you have logged in successfully, the main screen displays as shown.
All contents copyright 2008 ZyXEL Communications Corporation. 52