Connecting Two Switches Using Vlan - ZyXEL Communications VES-1616 Support Notes

ZyXEL VES-1616/24FA-5x Series Support Notes
3. Egress Process:
The Egress Process decides if the outgoing frames are to be sent tagged or
untagged. The Egress Process refers to the egress tag control information in
Filtering Database. If the value is tagged, outgoing frames on the egress port is
tagged. If the value is untagged, the tag will be removed before a frame leaves the
egress port.

Connecting Two Switches using VLAN

This example shows you how to configure VLAN settings on two VES-1616FA-54
switches which are connected using the Ethernet port. There are five VLANs on
the first switch and seven VLANs on the second switch. The Ethernet port is port
17 on both switches. VLANs are configured on the switches but how to configure
port 17 as the trunk port on both switches?
The following figure shows this network example.
All contents copyright 2008 ZyXEL Communications Corporation. 37