Using The Console Port; Using Ftp - ZyXEL Communications VES-1616 Support Notes

ZyXEL
2. Click the "Click Here" link for Restore Configuration to display the following
screen.
3. In the File Path field, click Browse to locate the firmware file.
4. Click Restore to start restoring configuration.

Using the Console Port:

1. Connect to the console port and launch a Terminal Emulation software.
2. Restart the switch to enter the debug mode via the terminal.
3. Enter "ATLC"
4. Use X-modem protocol to transfer (Send File) the configuration file (with a .rom
file extension).
5. Enter "ATGO" to restart the switch after file transfer and the configuration
restore processes are complete.

Using FTP:

1. Download (and unzipped) the correct model firmware to your computer.
2. Launch the FTP client on your computer to log into the switch. (From the
command prompt, type "ftp <Switch IP>".
3. Press [ENTER] when prompted for a user name
4. Enter the administrator login password to access the switch and display FTP
prompt.
5. Enter "bin" to set the transfer mode to binary.
6. Use "put" to transfer the configuration file from the computer to the switch, for
example: "put comfig.rom config" transfers the configuration file on your
computer (config.rom) to the switch and renames it to "config".
7. Enter "bye" to log out from the switch.
All contents copyright 2008 ZyXEL Communications Corporation.
VES-1616/24FA-5x Series Support Notes
5