ZyXEL Communications VES-1616 Support Notes page 31

ZyXEL VES-1616/24FA-5x Series Support Notes
7. First, set the switch to use port based VLAN. Click Basic Setting > Switch
Setup in the navigation panel and select "Port Based" in the VLAN Type field.
Click Apply to save your changes.
8. Next create logical partitions on the switch. Click Advanced Application >
VLAN in the navigation panel and select the ports to belong to the VLAN. For this
example, select ports 1~4 and 17, 18 to belong to a VLAN so they can
communicate with each other.
Although ports 5~8 are in another group, both groups cannot communicate with
each other. Here we also defined ports 17 and 18 as the uplink ports. Therefore,
All contents copyright 2008 ZyXEL Communications Corporation. 30