Table of Contents
Advertisement
4. MEASURING PROCEDURE
4-1 Function selection
1) Turn on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ) momentarily.
Pressing the " Power Button " ( 3-2, Fig. 1 )
*
continuously and > 2 seconds again will turn off the
meter.
2) The meter can select 2 kind function as :
a. Air velocity/Temp.
d.Type K/J Thermometer
Pressing the " Function Button " ( 3-3, Fig. 1 )
continuously ( not release the button ), the Display
will show the following text in sequence :
Air
Air velocity/Temp. measurement
tP
Type K/J Thermometer measurement
Until the Display show the desired mode ( Function ),
just release the " Function Button " ( 3-3, Fig. 1 ), the
meter will execute this function with default.
6
Advertisement
Table of Contents
