Audio System C0-70.4 Owner's Manual page 2

Congratulation on your purchase of your new c-Series amplifier.
IMPORTANT: Before installation your power amplifier, we recommend to read the owner´s manual carefully and
to follow the instructions regarding connection and fitting exactly.
ATTENTION: Pay attention to advices and instructions of the car manufacturer.
IMPORTANT: Your proof of purchase is evidence of warranty claim for repair or replacement. Keep your proof of
purchase, manual and original packaging.
ATTENTION: Use of sound components can impair your ability to hear necessary traffic sounds and may
constitute a hazard while driving your automobile.
Audio SystemGermany accepts no liability for hearing loss, bodily injury or property damage
as a result of use or misuse of our products. We recommend installing the equipment by an authorized service
center or dealer. A professional fitting and connection is the requirement for further warranty and perfect sound.
CO-100.2
- 2-Channel High Power Class-AB amplifier with SMD technology
- MOS-FET PWM Power Supply
- Stable into 2 ohm stereo per channel and 4 ohm bridged mode
- Variable switchable Low Pass Filter from 30 to 300 Hz
- Variable switchable High Pass Filter from 30 to 300 Hz
- Input Sensitivity: variable 200 mV maximum to 8 V minimum
- Multi-Way Protection Circuitry: overheating, overcurrent, short circuitry and speaker
DC protection
- Operating Voltage : DC 10 ~ 16 V power input
- Wired Remote Control RTC (optional)
- High-Power-Input (normally originial radio) with automatically „Turn-On"
- Adaptercable HLAC and rca hi (optional)
CO-70.4 / CO- 75.4 24 v .
.
- 4-Channel High Power Class-AB amplifier with SMD technology
- MOS-FET PWM Power Supply
- Stable into 2 ohm stereo per channel and 4 ohm bridged mode
- Variable switchable Low Pass Filter from 30 to 300 Hz
- Variable switchable High Pass Filter from 30 to 300 Hz
- Input Sensitivity: variable 200 mV maximum to 8 v minimum
- Multi-Way Protection Circuitry: overheating, overcurrent, short circuitry and speaker
DC protection
- Operating Voltage: DC 10 ~ 16 V / DC 20 ~ 32 V in CO-75.4 24 V power input
- Wired Remote Control RTC (optional)
- High-Power-Input (normally originial radio) with automatically „Turn-On"
- Adaptercable HLAC and rca hi (optional)
.
features
.
.
2
1,4
UPPER CLASS
PRICE/QUALITY: EXCELLENT
1,5
UPPER CLASS
PRICE/QUALITY: EXCELLENT