HP pocurve switch 408 Installation Manual page 4

Table of Contents

Advertisement

© Copyright 2001 Hewlett-Packard Company
All Rights Reserved.
This document contains information
which is protected by copyright. Repro-
duction, adaptation, or translation
without prior permission is prohibited,
except as allowed under the copyright
laws.
Publication Number
J4097-90101
March 2001
Applicable Product
HP ProCurve Switch 408 (HP J4097B)
Hewlett-Packard Company
8000 Foothills Boulevard, m/s 5552
Roseville, California 95747-5552
http://www.hp.com/go/hpprocurve
Disclaimer
The information contained in this docu-
ment is subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES
NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL,
INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. Hewlett-
Packard shall not be liable for errors
contained herein or for incidental or
consequential damages in connection
with the furnishing, performance, or use
of this material.
Hewlett-Packard assumes no responsi-
bility for the use or reliability of its soft-
ware on equipment that is not furnished
by Hewlett-Packard.
Warranty
A copy of the specific warranty terms
applicable to your Hewlett-Packard prod-
ucts and replacement parts can be
obtained from your HP Sales and Service
Office or authorized dealer.
Safety
Before installing and operating this
product, please read the "Installation
Precautions" in chapter 2, "Installing the
Switch 408", and the safety statements in
appendix C, "Safety and EMC Regulatory
Statements".

Advertisement

Table of Contents
loading

Table of Contents