Placards And Decals; Placards And Decals Machines With Electric Controls; Standard Placards And Decals; Placards And Decals Machines With Hydraulic Controls - Snorkel MHP15HD Operator's Manual

9. Pre-operational Inspection

Placards and Decals

Look to see that all plac ards and de cals are in place
and leg i ble. Clean dirty or ob scured de cals with
soap and wa ter and a soft lint cloth. Re place any
miss ing or il leg i ble plac ards or de cals be fore plac -
ing the MHP15/44HD V2 into ser vice for the daily
work shift.
NOTE:
Owing to manufacturing variances and customer
preferences there may be some small differences
in the decal layout on specific machines.
NOTE Safety Decals:
Details of the safety decals and their locations
are listed in the Safety chapter(s) near the
beginning of this manual.
Placards and Decals

Machines with Electric Controls

Re place ment de cals and plac ards for the
MHP15/44HD V2 are avail able from Snor kel deal -
ers.

Standard placards and decals

See pages 9 - 12 to 9 - 13 for the de cal list and lo ca -
tions of in di vid ual de cals.
Placards and Decals
Machines with Hydraulic Controls
Re place ment de cals and plac ards for the
MHP15/44HD V2 are avail able from Snor kel deal -
ers.
Standard placards and decals
See pages 9 - 14 and 9 - 15 for the de cal list and lo -
ca tions of in di vid ual de cals.
Placards and Decals
Low Voltage Insulated Machines
Re place ment de cals and plac ards for the
MHP15/44HD V2 are avail able from Snor kel deal -
ers.
Standard placards and decals
See pages 9 - 116 to 9 - 17 for the de cal lists and lo -
ca tions of in di vid ual de cals.
Note:
From time-to-time certain decals may be deleted,
altered or replaced, or new decals may be
added in line with new safety regulations
machine specification changes.
page 9 - 10
If you are un sure or want to check a par tic u lar
de cal or its place ment on the ma chine con tact
your near est Snor kel dealer or the snor kel
website.
or
Rev B MHP15/44HD V2 – 13620-1