At Platform Control Box (Steel Platform); At Platform Control Box; (Insulated Fibreglass Platform); At Platform Control Box (Non-Insulated Fibreglass Platform) - Snorkel MHP15HD Operator's Manual

3. Safety Devices

At platform control box

(steel platform)
LIFT
ENABLE
lb
kg
ELECTRIC
RIGHT UP
UPPER
LOWER
SLEW
BOOM
LEFT DOWN
Figure 3.4 - Emergency Stop Switch at
Platform Control Box - Steel Platform
At platform control box

(insulated fibreglass platform)

FUEL
ELECTRIC
EMERGENCY
LOWER
RIGHT UP
LOWER
SLEW
BOOM
LEFT DOWN
Figure 3.5 - Emergency Stop Switch at
Platform Control Box - Insulated Fibreglass
Platform
At platform control box
(non-insulated fibreglass platform)
LIFT
ENABLE
lb
kg
ELECTRIC
Figure 3.6 - Emergency Stop Switch at
Platform Control Box - Non-Insulated
Fibreglass Platform
page 3 - 2
FUEL
EMERGENCY CHOKE START
LOWER
UP UP RIGHT
JIB
ROTATE
BOOM BOOM
DOWN DOWN LEFT
CHOKE
LIFT
lb
ENABLE kg
START
UP UP RIGHT
JIB
UPPER
ROTATE
BOOM BOOM
DOWN DOWN LEFT
FUEL
EMERGENCY
CHOKE START
LOWER
Press the red EMERGENCY STOP button in, at
any time, under any conditions, and the entire
machine stops, and nothing moves. This switch
must be out (on) for anything on the MHP15/44HD
V2 to work. Pull the switch and it will pop out (on).
NOTE:
The ground control box is designed to override
the platform control box. If the platform control
box EMERGENCY STOP switch is in (off) the
ground con trol box can still be used to start and
op er ate the MHP15/44HD V2.

Other Safety Devices

Lanyard anchor points

Figure 3.7 - Lanyard Anchor Points - Steel
All personnel on the platform should attach their
safety harness lanyards to one (1) of the lanyard
anchor points.
Figure 3.8 - Lanyard Anchor Points -
Fibreglass Platform
Rev B
Platform
MHP15/44HD V2 – 13620-1