Upper Controls (Insulated Fibreglass Basket) - Snorkel MHP15HD Operator's Manual

8 Controls - Hydraulic
Fig ure 8.8 - Up per Con trols - Non-In su lated
Fibre glass Bas ket, Plat form Move ment
Con trol Valve levers
9. Enable Switch (Foot):You must step DOWN
on the foot switch in con junc tion with the
boom/plat form mov ing func tion you se lect.
The pur pose of this switch is to pre vent the
plat form/booms from mov ing if some thing or
some one ac ci den tally pushes one of the
boom/plat form mov ing con trols. The
boom/plat form mov ing con trols will not
op er ate un less the en able foot switch is held
down at the same time.
Figure 8.9 - Upper Controls, Enable Foot
Switch, Fibreglass Basket
Upper controls (insulated fibreglass
basket):
Emergency stop switch
Choke
Start switch
Lift enable indicator
Overload indicator
Fuel / electric switch (Option)
Emergency lower switch
Valve control lever for slew
Valve control lever for lower boom
page 8 - 6
Valve control lever for upper boom
Valve control lever for fly boom
Optional Valve control lever for platform
rotate
Enable switch (Foot)
1. Emergency Stop: Press the red
EMERGENCY STOP button in, at any time,
under any conditions, and the entire machine
stops, and nothing moves. This switch must
be out (on) to start or run the MHP from the
platform control box. Pull the switch and it
will pop out (on). Press the switch in (off) if
the platform is to stay in one position for a
long time. That will turn the engine off and
and save fuel.
RIGHT UP
LOWER
SLEW
BOOM
LEFT DOWN
Figure 8.10 - Upper Controls - Insulated
Fibreglass Basket, Engine Start - Emergency
2. Choke/Cold Start: Hold the switch DOWN
while you start an engine that is at ambient
air temperature (a "cold" engine). This will
choke the engine.
3. Start Switch: Press and hold this switch
DOWN to op er ate the starter mo tor of the
MHP1544HD.
4. Lift Enable: The platform can only be raised
when this light is lit. When this light is not lit
the platform will not raise because the
outriggers are not properly set.
5. Overload Indicator: This in di ca tor
il lu mi nates when the plat form is over loaded
(see Safety De vices Chap ter 3 Page 4).
6. Fuel / Electric Selector Switch (Option):
This switch (when fitted) allows switching
between different motive sources (see
Options Chapter).
Rev B
FUEL
CHOKE
ELECTRIC
LIFT
lb
kg
ENABLE
EMERGENCY
LOWER
START
UP UP RIGHT
JIB
UPPER
ROTATE
BOOM BOOM
DOWN DOWN LEFT
Stop
MHP15/44HD V2 – 13620-1