Doosan D35C-5 FDA04 Operation & Maintenance Manual page 198

Maintenance Section
Lubricating Grease (MPGM)
Use Multipurpose Molybdenum Grease (MPGM) for
all lubrication points. If MPGM grease can not be
used, multipurpose type grease which contains 3%
to 5% molybdenum disulfide can be used.
NLGI No.2 grade is suitable for most temperatures.
Use NLGI No.1 or No.0 grade for extremely low
temperature.
Transmission Oil
NOTICE
This oil is formulated for transmissions and drive
trains only, and should not be used in engines.
Shortened engine life will result.
NOTE: Multi-grade oils
DOOSAN for use in transmissions.
Multi-grade oils which use high molecular
weight polymers
improvers lose their viscosity effectiveness
by permanent and temporary shear of the
viscosity index improver and therefore, are
not recommended for transmission and
drive train compartments.
NOTE: Failure to follow this recommendation can
cause shortened transmission life due to
material incompatibility,
frictional requirements for disk materials
and/or excessive gear wear.
The API CD/TO - 2 specification or MIL - L 2104D, E
or F oil could be used.
are not blended by
as viscosity index
inadequate
Brake Fluid
Oil Cooled Disc Brake Only
Use heavy duty hydraulic brake fluid certified by oil
supplier to meet the latest version of following
classifications.
• ISO 6743/4
• AFNOR NFE 48-603
• DIN 51524 TEIL 2
• HAGGLUNDS DENISON
• CINCINNATI
Viscosity : ISO VG32
Brake reservoir oils that have passed the Vickers
vane pump test (35VQ25). These oils should have
antiwear, antifoam,
additives for heavy duty use as stated by the oil
supplier. ISO viscosity grade of 32 would normally
be selected.
The following products are authorized for use.
Supplier
TOTAL
SHELL
MOBIL
CALTEX
ESS
CASTROL
-196-
HFO-HF2
P68,69,70
antirust and antioxidation
Product Name
AZOLLAZS
TELLUS
DTE20S'
RANDO HD
NOTO H
HYSPIN AWS
HM
HM
H-LP