Shell newmotion Business Pro View 2.2 Installation Manual page 20

7. PRODUCT USE / OPERATION
7.1 BEFORE USE: ACTIVATION &
REGISTRATION
To make the charge point ready for use the owner needs
to activate the charge point through our online portal
my.newmotion.com. The serial number of the charge
point is required for this process and can be found on the
right hand side of the charge point. Charge cards can be
activated in the same online portal.
7.2 REGULAR USE
Introduction to charging your EV:
First step is to connect your car to the charge point by
plugging in the charge cable.
If you are using Plug&Charge the session will start
automatically.
If you have to identify first; swipe your charge card above
the LED.
First the LED will flash green to authenticate the card,
after authentication, the session will start. If the LED
flashes red, the session is not accepted.
When the car has delayed charging configured, the LED
will remain green, until charging can start from car and
charge point.
Start charging? Plug in & identify
Stop charging? Identify & unplug
Full or waiting to charge
Plug in or identify
Charging
Not accepted
Error
Flashing green or multi colors: starting procedure or
software update procedure for charge point.
INSTALLATIEHANDLEIDING – P20
INSTRUCTION MANUAL – P20 | P20
VERSION 0129NM02INT01
095NM21INT02