Recommended Work - KTM 250 EXC Six Days TPI 2019 Owner's Manual

Hide thumbs Also See for 250 EXC Six Days TPI 2019:
Table of Contents

Advertisement

10 SERVICE SCHEDULE
Check the antifreeze and coolant level. (
Check the cables for damage and for routing without kinks.
Check that the throttle cables are undamaged, routed without sharp bends, and set cor-
rectly.
Clean the air filter and air filter box.
Change glass fiber yarn filling in the main silencer.
Service the fork.
Perform shock absorber service.
Check the screws and nuts for tightness.
Change the fuel screen.
Check the fuel pressure.
Check the headlight setting. (
Check idle.
Final check: Check the vehicle for operating safety and take a test ride.
Read out the error memory after the test ride using the KTM diagnostics tool.
Make the service entry in the KTM Dealer.net and in the Service and Warranty Booklet.
One-time interval
Periodic interval
10.3
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Lubricate the steering head bearing.
Clean the pressure sensor hose.
Service the fork.
Perform shock absorber service.
Check the electric starter drive.
Change the fuel filter.
Change the piston and check the cylinder.
Change the oil pump.
Perform minor engine service. (Check the exhaust control for functioning and
smooth operation. Check the clutch.)
52
(
p. 140)
p. 126)

Recommended work

(
Every 10 operating hours when used for motorsports
Once after 1 operating hour
p. 129)
(
p. 83)
(
p. 85)
Every 40 operating hours when used for motorsports
Every 10 operating hours when used for motorsports
Once after 20 operating hours
Once after 10 operating hours
p. 97)
(
p. 78)
Every 40 operating hours
Every 20 operating hours
Once after 5 operating hours
Annually
Every 80 operating hours
Every 40 operating hours

Advertisement

Table of Contents
loading

Table of Contents