Troubleshooting Guide - Hatco Flav-R-Savor FSHC-7 Series Installation And Operating Manual

English
WARNING
This unit must be serviced by trained and qualified
personnel only. Service by unqualified personnel may lead
to electric shock or burn.
Symptom
Unit is plugged in, but nothing
works.
Unit operates, but is not
circulating air inside cabinet.
Unit is not producing any "hot
air" inside cabinet.
Unit is producing erratic
temperatures inside cabinet.
Unit is heating, but is not
producing humidity inside
cabinet. Low water light is OFF
and unit is full of water.
Unit is heating, but is not
producing humidity inside
cabinet. Low water light is ON,
but unit is full of water.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please
contact the nearest authorized Hatco Service agency or Hatco
for assistance. To locate the nearest Service agency, log onto
the Hatco website at www.hatcocorp.com and click on
Find Service agent, or contact the Hatco Parts and Service
Team at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: partsandservice@hatcocorp.com
Form No. FSHC67m-0117
Probable Cause
Unit not turned on.
No power to unit.
Tripped circuit breaker.
Power cord is damaged.
Defective POWER ON/OFF (I/O) switch.
Blower motor defective.
Incorrect voltage supplied to blower motor.
Incorrect voltage supplied to heating element.
Blower motor not working.
air heating element(s) defective.
air thermostat control is defective.
air down tube is not connected/removed.
Water heating element is defective.
Humidity thermostat control is set too low.
Humidity thermostat control defective.
Water level sensor defective.

TROUBLESHOOTING GUIDE

ELECTRIC SHOCK HAzARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
move POWER ON/OFF (I/O) switch to the ON (I) position.
Check electrical receptacle and verify that power supply
matches specifications on unit. If receptacle is not working,
check circuit breaker and reset, or plug unit into a different
known working receptacle.
Check circuit breaker and reset, if tripped.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Reconnect/Install air down tube. Contact authorized Service
agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
adjust humidity control to higher setting.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
13
WARNING
Corrective Action