Silicon Laboratories C8051F912 User Manual page 3

3.3.2. 3rd Party Toolsets
The Silicon Laboratories IDE has native support for many 8051 compilers. The full list of natively supported tools is
as follows:
 Keil
 IAR
 Raisonance
 Tasking
 Hi-Tech
 SDCC
The demo applications for the C8051F912 target board are written to work with the Keil and SDCC toolsets.
3.4. Keil Evaluation Toolset
3.4.1. Keil Assembler and Linker
The Keil demonstration toolset assembler and linker place no restrictions on code size.
3.4.2. Keil Evaluation C51 C Compiler
The evaluation version of the C51 compiler is the same as the full version with the following limitations: (1)
Maximum 4 kB code generation, (2) There is no floating point library included. When installed from the CD-ROM,
the C51 compiler is initially limited to a code size of 2 kB, and programs start at code address 0x0800. Refer to
"AN104: Integrating Keil Tools into the Silicon Labs IDE" for instructions to change the limitation to 4 kB and have
the programs start at code address 0x0000.
Downloaded from Elcodis.com electronic components distributor
Rev. 0.1
C8051F912-DK
3