EtherCAT
7.2
MAS EtherCAT configuration of the DDLS 538 ...
With the MAS EtherCAT configuration, the user defines the position at which the DDLS 538 ... is installed:
• Installation on the side facing the master (master side)
• Installation on the side facing the slave (slave side)
NOTICE
Information for activating the MAS EtherCAT configuration see chapter 6.1 "Setting the operat-
ing mode".
Master-side installation
For devices installed on the master side, the MAS EtherCAT configuration must be activated. The MAS
LED of the device illuminates continuously green.
E therC A T
1
1
Master
2
Bus terminals
3
DDLS 538 ... master side
4
DDLS 538 ... slave side
5
Operating mode/MAS configuration = on
Fig. 7.1:
MAS EtherCAT configuration activated
Leuze electronic GmbH + Co. KG
2
3
D D LS 538
„M A S " = on
5
4
D D LS 538
I/O 's
„M A S " = off
DDLS 538 ...
51