③ Lan Cable; ➃ Network Card; ⑤ Dc In / Trigger In Connection Cable; ⑥ Ac Adapter (Power Supply) (If Necessary) - JAI GO-5000M-PGE-1 User Manual

GO-5000M-PGE-1 | GO-5000M-PGE-UV-1 | User Manual (Ver. 1.0)
③ LAN Cable
Connect a LAN cable to the RJ-45 connector.
Use a LAN cable that is Category 5e or higher (Category 6 recommended).
l
Use a LAN cable that is an STP cable.
l
When supplying power via PoE, connect to a PoE-compatible switching hub or a PoE-
l
compatible network card.
Refer to the specifications of the cable for details on its bend radius.
l
Caution: See the
➃ Network Card
Install this in the computer that will be used to configure and operate the camera. As the camera
supports PoE, you can also use PoE-compatible network cards. Refer to the instruction manual of the
network card and configure settings on the computer as necessary.
⑤ DC IN / Trigger IN Connection Cable
Performs external I/O such as power supply and trigger input.
⑥ AC Adapter (Power Supply) (If Necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN
connector on the camera.
Notes on LAN Cable Connection topic as well.
- 19 -
Preparation