Download
Share
Print this page
NCR 7746-K460 Kit Instructions
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. Racks & Stands
  5. 7746-K460
  6. Kit instructions

NCR 7746-K460 Kit Instructions

2x20 customer display, mount, and cable for px
Hide thumbs

Advertisement

Quick Links

Download this manual
Kit Instructions
2x20 Customer Display, Mount, and Cable for PX
7746-K460
Issue A

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7746-K460 and is the answer not in the manual?

Questions and answers

Related Manuals for NCR 7746-K460

Summary of Contents for NCR 7746-K460

  • Page 1 Kit Instructions 2x20 Customer Display, Mount, and Cable for PX 7746-K460 Issue A...

  • Page 2: Revision Record

    The product described in this document is a licensed product of NCR Corporation. NCR is a registered trademark of NCR Corporation. NCR POS is a trademark of NCR Corporation in the United States and/or other countries. Other product names mentioned in this publication may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.

  • Page 3: Kit Contents

    2x20 Customer Display, Mount, and Cable for This kit provides a 2x20 Customer Display, Mount, and Cable for the NCR PX10/PX15 POS (7746). Kit Contents...

  • Page 4: Installation Procedure

    2x20 Customer Display, Mount, and Cable for PX Installation Procedure 1. Pivot the display toward the back. 2. Remove the screw (1) that secures the Front Neck Cover to the neck. Note: Use only a screwdriver with a #1 Philips bit to avoid stripping the screw head.
  • Page 5 2x20 Customer Display, Mount, and Cable for PX 3. Pivot the Front Neck Cover away from the terminal. 4. Lay the terminal face down on a flat surface. Caution: Always use a soft material (cloth, foam) to protect the display screen when placing the terminal face down.
  • Page 6 2x20 Customer Display, Mount, and Cable for PX 6. Remove the Rear Base Cap. 7. Set the terminal to stand upright, and then pivot the display toward the front. 8. Pivot the Back Neck Cover away from the terminal.
  • Page 7 2x20 Customer Display, Mount, and Cable for PX 9. Lay the 2x20 display face down on a flat surface. Caution: Always use a soft material (cloth, foam) to protect the display screen when placing the terminal face down. 10. Connect the Interface Cable to the back of the 2x20 display. Ensure that the latch is properly engaged.
  • Page 8 2x20 Customer Display, Mount, and Cable for PX 12. Secure the neck mount to the back of the 2x20 display using screws (2). 13. Set the terminal to stand upright, and then pivot the display toward the front.
  • Page 9 2x20 Customer Display, Mount, and Cable for PX 14. Attach the neck mount with 2x20 display to the terminal. 15. Secure the neck mount and 2x20 display assembly on the neck of the PX10 terminal with a screw. 16. Lay the terminal face down on a flat surface. Caution: Always use a soft material (cloth, foam) to protect the display screen when placing the terminal face down.
  • Page 10 2x20 Customer Display, Mount, and Cable for PX 17. Route the Interface Cable through the right side of the neck base and connect the cable to the COM Port of the terminal stand. 18. Attach the Rear Base Cap to the bottom of the neck, and secure with screws (2). 19.