Grizzly T32459 Owner's Manual page 19

3. Standing in front of machine, push belt mul-
tiple times along platen so it moves in direc-
tion of operation (see Figure 18), then watch
how belt tracks on wheels.
Belt Tracking Knob
Figure 18. Belt tracking components.
— If belt tracks centered on wheels, proceed
to Step 5.
— If belt does not track centered on wheels,
proceed to Step 4.
4. Use belt tracking knob (see Figure 18) to
adjust belt tracking while continuing to rotate
belt by hand to check adjustment.
— Turn knob clockwise to move belt left on
wheels and platen, and turn knob counter-
clockwise to move belt right.
5. Once belt tracks centered on wheels, remove
gloves.
WARNING: DO NOT wear gloves while
operating machine. Gloves could be caught
in moving parts.
6. Press EMERGENCY STOP button in (see
Figure 19).
Model T32459 (Mfd. Since 03/23)
7. Move ON/OFF switch to OFF position (see
Figure 19).
8. Turn variable-speed dial all the way counter-
clockwise (see Figure 19).
EMERGENCY
STOP Button
Variable-Speed
Dial
ON/OFF
Switch
Figure 19. Location of power controls.
9. Connect machine to power. Motor speed digi-
tal readout will illuminate.
10. Twist EMERGENCY STOP button clockwise
until it springs out (see Figure 20). This
resets button so machine can start.
EMERGENCY STOP
Button
Figure 20. Resetting EMERGENCY STOP
button.
11. Move ON/OFF switch to ON position, slow-
ly turn variable-speed dial clockwise just
enough to start machine, verify belt is track-
ing correctly in center of platen and wheels,
and fine-tune tracking with belt tracking knob
as necessary while machine is running.
-17-