Grizzly T32459 Owner's Manual page 17

9. On gas strut, thread (2) hex nuts all the way
onto ball studs, as shown in Figure 13.
10. Adjust wing nut until it is flush with knob on
belt tracking knob (see Figure 13).
Belt Tracking
x 2
Ball Stud
(1 of 2)
Figure 13. Hex nuts threaded all the way onto
ball studs and wing nut flush with knob.
11. Thread belt tracking knob about
hole shown in Figure 14.
12. Thread gas strut ball studs into frame holes,
as shown in Figure 14.
Figure 14. Gas strut and belt tracking knob
installed.
Model T32459 (Mfd. Since 03/23)
Knob
⁄ " into frame
1
2
Belt
Tracking
Knob
Gas Strut
13. Push belt tension handle (see Figure 15)
toward frame tilt lock handle to compress gas
strut.
Belt Tension
Handle
Platen Lock
Handle
Figure 15. Direction to push belt tension handle,
and location of platen lock handle.
14. While holding belt tension handle to keep gas
strut compressed, install abrasive belt around
wheels, being sure arrows on belt match belt
rotation arrow on machine (see Figure 16).
Wheel
(1 of 4)
Figure 16. Abrasive belt installed around wheels.
Belt
Belt
Rotation
Arrow
-15-