Control Board; Dmx-Controlled Operation - EuroLite Laser Simulator LED S-20 User Manual

Control board

The control board offers several features, i.e. setting the DMX starting address, running a
preset program or selecting a DMX channel mode.
Browse through the menu by pressing MODE. You can change the selection by pressing
UP or DOWN. Press ENTER in order to confirm. You can leave every mode by pressing
MODE. The functions provided are listed in the following sections.
MODE UP DOWN ENTER

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Addressing
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED S-20 Laser Simulator will respond to the controller.
If you set, for example, the address to channel 8, the device will use the channel 8 to 17 for control.
Please, be sure that you don't have any overlapping channels in order to control each LED S-20 Laser
Simulator correctly and independently from any other fixture on the DMX data link.
If two, three or more LED S-20 Laser Simulator are addressed similarly, they will work similarly.
For address setting, press the Mode-button until the display shows „addr" and set the desired address via
the Up/Down-buttons.
25/32 00099128.DOC, Version 1.0