Table of Contents
Advertisement
3. Orient one of the Uprights (2) and one of the
Bases (1) as shown; make sure that the
hexagonal holes (A) are on the indicated side
of the Upright.
Attach the Upright (2) to the Base (1) with the
two indicated M8 x 68mm Carriage Bolts (20)
and two M8 Locknuts (22); do not tighten the
Locknuts yet.
Attach the other Upright (not shown) to the
other Base (not shown) in the same way.
4. Orient the Bottom Crossbar (10) so that the
warning decal (B) is on top.
Attach the Bottom Crossbar (10) to one of the
Uprights (2) with two M8 x 77mm Bolts (28), a
Support Plate (13), and two M8 Locknuts (22);
do not tighten the Locknuts yet.
Attach the Bottom Crossbar (10) to the other
Upright (2) in the same way.
3
4
10
B
2
28
8
A
2
22
22
1
20
13
22
2
Advertisement
Table of Contents
