Table of Contents
Advertisement
10. Orient the Backrest (8) as shown. Attach
the Backrest to the Top Crossbar (7) with
four M6 x 16mm Screws (27) and four M6
Washers (21); start all the Screws, and then
tighten them.
11. Attach an Arm Pad (6) to one of the Dip Arms (5)
with two M6 x 73mm Screws (18).
Repeat this step with the other Arm Pad (6).
12. Make sure that all parts have been properly tightened before the exercise rack is used. Extra parts may
be included.
10
7
8
11
6
5
18
11
27
21
27
21
6
Advertisement
Table of Contents
