Table of Contents
Advertisement
7. Insert the CPU into the
socket. The gold triangular
mark on the CPU must
align with the corner of
the CPU socket shown on
the photo.
The CPU's notch will at
the same time fit into the
socket's alignment key.
Important:
The CPU will fit in only one orientation and can easily be inserted without exerting
any force.
Chapter 2 Hardware Installation
Chapter 2
Gold triangular mark
Alignment key
Alignment key
13
8. Close the load plate then
push the load lever down.
While closing the load
plate, make sure the front
edge of the load plate
slides under the retention
knob.
9. Hook the load lever under
the retention tab.
Retention knob
Load lever
Retention tab
www.dfi.com
Advertisement
Table of Contents
