DFI SD100-H110/Q170 User Manual page 33

Video Configuration
This section configures the video settings.
InsydeH20 Setup Utility
Advanced
Video Configuration
Internal Graphics <Auto>
Always Enabled PEG <Disabled>
Boot display <VGA+DVI>
Backlight Type <Normal+PWM Mode>
Panel Color Depth <18 Bit>
EDP Mode <PWM Mode>
LVDS Mode <PWM Mode>
LVDS Support <Disabled>
LCD Panel Type <1024x768>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Internal Graphics
Keep IGFX enabled or disabled based on the setup options.
Always Enabled PEG
Enable or disable the PEG function.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Keep IGFX enabled based
on the setup options.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Boot display
Set the display device combination.
Advanced
Video Configuration
Internal Graphics
Always Enabled PEG
Boot display
Backlight Type
Boot display
Panel Color Depth
EDP Mode
LCD+DVI
LVDS Mode
LCD+VGA
LVDS Support
LCD+DP
LCD Panel Type
DVI+LCD
DVI+VGA
DVI+DP
VGA+LCD
VGA+DVI
VGA+DP
DP+LCD
DP+DVI
DP+VGA
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Backlight Type
Set the backlight type.
Advanced
Video Configuration
Internal Graphics
Always Enabled PEG
Boot display
Backlight Type
Panel Color Depth
EDP Mode
LVDS Mode
LVDS Support
LCD Panel Type
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
33
InsydeH20 Setup Utility Rev. 5.0
Chose display device com-
bination
<Auto>
<Disabled>
<VGA+DVI>
<Normal+PWM Mode>
<18 Bit>
<PWM Mode>
<PWM Mode>
<Disabled>
<1024x768>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

InsydeH20 Setup Utility Rev. 5.0
Backlight Type Setting
<Auto>
<Disabled>
<VGA+DVI>
<Normal+PWM Mode>
<18 Bit>
<PWM Mode>
<PWM Mode>
<Disabled>
<1024x768>
Backlight Type
Normal+PWM Mode
Normal+DC Mode
Invert+PWM Mode
Invert+DC Mode
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com