DFI SD100-H110/Q170 User Manual page 64

4. In the Exit menu, select Exit Saving Changes then select OK.
InsydeH20 Setup Utility
Main Advanced Security Boot
Exit Saving Changes
Load Optimal Defaults
Discard Changes
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Chapter 6 Intel AMT Settings
Rev. 5.0
Exit
Exit system setup and save
your changes.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 6
Enable Intel AMT in the Intel
®
Engine BIOS Extension (MEBX) Screen
1. When the system reboots, you will be prompted for a password. The default password is
"admin". Enter the default password in the space provided under Intel(R) ME Password
then press Enter.
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
MEBx Login
> Intel (R) ME General Settings
> Intel (R) AMT Configuration
MEBx Exit
Intel(R) ME Password
[↑↓] = Move Highlight
64
Management
®
MAIN MENU
[Enter] = Select Entry [Esc]= Exit
www.dfi.com