DFI SD100-H110/Q170 User Manual page 38

InsydeH20 Setup Utility
Advanced
Fan Speed Count 1 [30]
Fan Speed Count 2 [40]
Fan Speed Count 3 [50]
Fan Speed Count 4 [75]
COM Port 1 <Enable>
Base I/O Address <3F8>
Interrupt <IRQ3>
COM Port 2 <Enable>
Base I/O Address <2F8>
Interrupt <IRQ4>
Type <RS232>
COM Port 3 <Enable>
Base I/O Address <3E8>
Interrupt <IRQ3>
COM Port 4 <Enable>
Base I/O Address <2E8>
Interrupt <IRQ4>
WDT <Disable>
Case Open <Disable>
AC Power Loss <Always off>
PC Health Status

F1 Help ↑/↓ Select Item F5/F6 Change Values
Esc Exit ←/→ Select Item Enter Select
Serial Port 1 to Serial Port 4
Configure the settings to use the serial port.
Disable No configuration
Enable User configuration
Auto EFI/OS chooses configuration
Type
Choose RS232/RS485 (Peer-to-Peer) for the serial port type.
Chapter 3 BIOS Setup
Rev. 5.0
Configure Serial port using
options: [Disable] No Con-
figuration [Enable] User
Configuration [Auto] EFI/
OS chooses configuration
F9 Setup Defaults
SubMenu F10 Save and Exit

Chapter 3
Advanced
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Type
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
Case Open
AC Power Loss
PC Health Status

F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
WDT
Enable or disable the watchdog function.
Case Open
Enable or disable the case open.
AC Power Loss
Set the AC power loss always off/on.
38
InsydeH20 Setup Utility Rev. 5.0
[30]
[40]
[50]
[75]
<Enable>
<3F8>
<IRQ3>
<RS232>
<Enable>
<2F8>
<IRQ4>
<RS232>
<Enable>
<3E8>
<IRQ3>
<Enable>
<2E8>
<IRQ4>
<Disable>
<Disable>
<Always off>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com