Configuring An Ipsec/Ip Filtering Certificate - Epson ES-C380W User Manual

Default policy:
• IPsec/IP Filtering: Enable
• Access Control: Refuse Access
Group policy:
• Enable this Group Policy: Select
• Access Control: Permit Access
• Remote Address(Host): Client IP address
• Method of Choosing Port: Service Name
• Service Name: Select ENPC, SNMP, HTTP (Local), HTTPS (Local), and Network Scan
Receiving Access from a Specified IP Address only
In these examples, the client will be able to access and configure the product in any policy configuration.
Default policy:
• IPsec/IP Filtering: Enable
• Access Control: Refuse Access
Group policy:
• Enable this Group Policy: Select
• Access Control: Permit Access
• Remote Address (Host): Administrator's client IP address
Note: Regardless of policy configuration, the client will be able to access and configure the scanner.
Parent topic:

Configuring an IPsec/IP Filtering Certificate

You can configure a certificate for IPsec/IP traffic filtering using Web Config.
1. Access Web Config and select the Network Security tab.
2. Under IPsec/IP Filtering, select Client Certificate.
3. Click Import to add a new client certificate and enter any necessary settings.
4. Click OK.
Parent topic:
Configuring IPsec/IP Filtering
Configuring IPsec/IP Filtering
214