Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Select the
2. Select Settings > Basic Settings.
3. Scroll down and select Direct Power On.
4. Select On.
Parent topic:
Changing Regular Cleaning Alert Settings
You can set an alert to appear to remind you to perform regular cleaning after a certain number of scans.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Select the
2. Select Settings > Regular Cleaning Alert Settings.
3. Do the following:
• Set the Warning Alert Setting to On to receive a notification when it is time to clean inside the
scanner.
• On the Count Alert Setting screen, use the + and – icons to change the number of scans before
the notification appears.
4. Select OK to exit.
Parent topic:
Changing Roller Replacement Alert Settings
You can set an alert to appear to remind you to replace the roller after a certain number of scans.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Select the
2. Select Settings > Roller Replacement Alert Setting.
home icon, if necessary.
Using the Control Panel
home icon, if necessary.
Using the Control Panel
home icon, if necessary.
36