Table of Contents
Advertisement
5.3 Section cut from the work surface
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
Create an opening with the dimensions
shown in the figure in the work surface of
the piece of furniture.
L (mm)
X (mm)
600
A (mm)
B (mm)
C (mm)
min 50
min 460 min 750
Installation
Y (mm)
560
490
D (mm)
E (mm)
20÷60
min 50
5.4 Mounting
Over built-in oven
The distance between the hob and the
kitchen furniture or other installed
appliances must be enough to ensure
sufficient ventilation and air discharge.
If installed above an oven, a space must be
left between the bottom of the hob and the
top of the appliance installed below.
opens on bottom
opens on bottom and on rear
If installed on top of an oven, the
latter must be equipped with a
cooling fan.
37
Advertisement
Table of Contents
