1. Manuals
  2. Brands
  3. Smeg Manuals
  4. Hob
  5. P1752XBN
  6. Manual

Smeg P1752XBN Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1. INSTRUCTIONS FOR USE ................................................................ 4
2. SAFETY PRECAUTIONS ................................................................... 6
3. ENVIRONMENTAL CARE................................................................... 8
4. DESCRIPTION OF CONTROLS......................................................... 9
5. USING THE HOB.............................................................................. 10
6. CLEANING AND MAINTENANCE .................................................... 14
7. POSITIONING IN THE COUNTER TOP .......................................... 16
8. ELECTRICAL CONNECTION........................................................... 19
9. GAS CONNECTION ......................................................................... 20
10. ADAPTATION TO DIFFERENT TYPES OF GAS ............................ 22
THESE INSTRUCTIONS ARE VALID ONLY FOR THE DESTINATION COUNTRIES
WHOSE IDENTIFYING SYMBOLS ARE INCLUDED ON THE COVER OF THIS
MANUAL.
INSTRUCTIONS FOR THE USER: these contain user advice, the description
of the controls and the correct procedures for cleaning and maintenance of
the appliance.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified
technician who must install the appliance, set it functioning and carry out
an inspection test.
@
Further information about the products can be found at www.smeg.com
Contents
3

Advertisement

Table of Contents
loading

Related Manuals for Smeg P1752XBN

Summary of Contents for Smeg P1752XBN

  • Page 1: Table Of Contents

    INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified technician who must install the appliance, set it functioning and carry out an inspection test. Further information about the products can be found at www.smeg.com...

  • Page 2: Instructions For Use

    General instructions 1. INSTRUCTIONS FOR USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKING HOB. WE ADVISE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE HOB.
  • Page 3 General instructions NEVER PLACE PANS WITH BOTTOMS WHICH ARE NOT PERFECTLY FLAT AND SMOOTH ON THE COOKING HOB PAN STANDS. NEVER USE CONTAINERS WHICH PROJECT BEYOND THE OUTSIDE EDGE OF THE HOB.

  • Page 4: Safety Precautions

    General instructions 2. SAFETY PRECAUTIONS CONSULT THE INSTALLATION INSTRUCTIONS FOR SAFETY STANDARDS ON ELECTRICAL OR GAS APPLIANCES AND FOR VENTILATION FUNCTIONS. IN YOUR INTERESTS AND FOR YOUR SAFETY THE LAW REQUIRES THAT THE INSTALLATION AND SERVICING OF ALL HOUSEHOLD APPLIANCES IS CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE.
  • Page 5 General instructions DO NOT LET CHILDREN GO NEAR THE APPLIANCE WHEN IT IS IN OPERATION OR PLAY WITH IT AT ANY TIME. DO NOT INSERT POINTED METAL OBJECTS (CUTLERY OR UTENSILS) INTO THE SLOTS IN THE APPLIANCE. DO NOT USE STEAM JETS FOR CLEANING THE APPLIANCE. THE STEAM COULD REACH THE ELECTRONICS, DAMAGING THEM AND CAUSING SHORT-CIRCUITS.

  • Page 6: Environmental Care

    Instructions for disposal 3. ENVIRONMENTAL CARE Our environmental care Pursuant to Directives 2002/95/EC, 2002/96/EC, 2003/108/EC, relating to the reduction of the use of hazardous substances in electrical and electronic appliances, as well as to the disposal of refuse, the crossed out bin symbol on the appliance indicates that the product, at the end of its useful life, must be collected separately from other refuse.

  • Page 7: Description Of Controls

    Instructions for the user 4. DESCRIPTION OF CONTROLS Control zone All the hob controls are grouped together on the front panel. CONTROL ZONE 4-burner hob 5-burner hob KNOB DESCRIPTION To light the flame, press the knob and turn it anti- clockwise to between the maximum and the minimum flame symbol...

  • Page 8: Using The Hob

    Instructions for the user 5. USING THE HOB Before lighting the burners, make sure that the burners, flame-spreader crown, burner caps and pan stands are fitted correctly. The igniters and thermocouples B, on the hob should be inserted into the holes A in the flame-spreader crowns.
  • Page 9 Instructions for the user To position each pan stand correctly on its burner, follow the instructions below: 5-burner hob Place the side pan stands as shown in Then place the central pan stand the figure. resting it on the side pan stands. 4-burner hob Place the pan stands as shown in the figure.
  • Page 10 Instructions for the user Lighting the burners using a safety device The burner controlled by each knob is shown next to the knob (the example to the left corresponds to the front left burner). The appliance is equipped with electronic ignition. Simply press the knob and simultaneously turn it anticlockwise to the minimum flame symbol, until it lights.
  • Page 11 Instructions for the user Pan diameters Burner min. and max. Ø (in cm) Auxiliary 7 - 18 Semi-rapid 10 - 24 Rapid 14 - 26 Reduced rapid 12 - 24 Ultra-rapid 12 - 28 Double crown 12 - 24 • Do not use griddles or plates to cook or heat food on the ultra-rapid/triple crown burner;...

  • Page 12: Cleaning And Maintenance

    Instructions for the user 6. CLEANING AND MAINTENANCE Important: DO NOT USE STEAM JETS FOR CLEANING THE HOB. Before performing any operations requiring access to powered parts, disconnect the appliance from the power supply. Cleaning the hob To keep the hob in good condition it should be cleaned regularly after use. Let it cool first.
  • Page 13 Instructions for the user 6.2.2 Pan stands Remove the pan stands and clean them with lukewarm water and non-abrasive detergent, making sure to remove any encrustations. Replace them on the cooking hob. These components must not be washed in the dishwasher. 6.2.3 Flame-spreader crowns For easier cleaning, the burner caps and flame-spreader crowns can be removed;...

  • Page 14: Positioning In The Counter Top

    Instructions for the installer 7. POSITIONING IN THE COUNTER TOP The following operation requires building and/or carpentry work and must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they are heat resistant (T 90°C).
  • Page 15 Instructions for the installer Placing the insulating seal Carefully position the supplied insulating seal on the outer perimeter of the hole made in the counter top as shown in the figure below, trying to make it stick on the entire surface by applying light pressure on it with your hands (See the dimensions indicated in the figure).
  • Page 16 Instructions for the installer Fixing using brackets The figure to the side shows the exact holes to be used to correctly attach the hob to the counter top with brackets. Fix the hob to the unit using the appropriate brackets supplied. To secure the hob correctly to the counter top, tighten the brackets A in the appropriate holes on the sides of...

  • Page 17: Electrical Connection

    Instructions for the installer 8. ELECTRICAL CONNECTION Make sure that the voltage and capacity of the power line conform to the data shown on the plate located under the casing. Do not remove this plate for any reason. The plug at the end of the supply cable and the wall socket must be of the same type and must conform to the applicable legislation on electrical installations.

  • Page 18: Gas Connection

    Instructions for the installer 9. GAS CONNECTION If the appliance is installed on an oven, you must avoid running the gas tube round the back of the oven in order to avoid overheating. Connection to the gas supply network can be made using a rigid copper hose or a continuous wall flexible steel hose in compliance with the guidelines established by the applicable standard.
  • Page 19 Instructions for the installer Connection to LPG Use a pressure regulator and make the connection on the gas cylinder following the guidelines set out in the regulations in force. Make sure that the feed pressure complies with the values indicated in the table at point “10.

  • Page 20: Adaptation To Different Types Of Gas

    Instructions for the installer 10.ADAPTATION TO DIFFERENT TYPES OF GAS Before carrying out the following operations, disconnect the appliance from the power supply. The cooker hob is preset for natural gas G20 (2H) at a pressure of 20 mbar. If other types of gas are to be used, the nozzles must be replaced and the primary air must be adjusted.
  • Page 21 Instructions for the installer • Lift the hob top upwards. 10.2 Adjustment for LPG Loosen screw A and push support B all the way. Using a a double head, remove nozzle C and replace it with the appropriate nozzle, following the instructions in the tables for the type of gas to be used.
  • Page 22 Instructions for the installer 10.3 Adjustment for natural gas The hob is preset for natural gas G20 (2H) at a pressure of 20 mbar. To reset the appliance for operation with this type of gas, carry out the same steps as described in “10.2 Adjustment for LPG”, but select the nozzles and adjust the primary air for natural gas as indicated in the table below and in "10.4 Primary air adjustment”.
  • Page 23 Instructions for the installer 10.4 Primary air adjustment Refers to distance “X” in mm. G30/G31 BURNER 30/37 mbar 20 mbar Auxiliary (1) Semi-rapid (2) Rapid (3) Reduced Rapid (4) Ultra-rapid (5) Internal Double crown (6) External To identify the burners on your hob, refer to the drawings in “10.6 Arrangement of the burners on the cooking hob”.
  • Page 24 Instructions for the installer 10.6 Arrangement of the burners on the cooking hob BURNERS 1. Auxiliary 2. Semi-rapid 3. Rapid 4. Reduced Rapid 5. Ultra-rapid 6. Double crown 10.7 Lubrication of gas taps Over time the gas taps may become difficult to turn and get blocked. Clean them internally and replace the lubrication grease.

Table of Contents