Table of Contents
Advertisement
5.3 Section cut from the work surface
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
Create an opening with the dimensions
shown in the figure in the work surface of
the piece of furniture.
L (mm)
740
730 ÷ 733
A (mm)
B (mm)
min 200 min 460 min 750 20 ÷ 60
*If there is a piece of furniture above the
cooktop. In case of hood, refer to the values on
the dedicated manual.
20
X (mm)
Y (mm)
500 ÷ 503
C (mm)
D (mm)
E (mm)
min 50
Installation
Overall dimensions: gas and electrical
connection location (measures in mm)
View from the bottom
G: Gas connection
E: Electrical connection
Right view
Rear view
Advertisement
Table of Contents
