Table of Contents
Advertisement
1. INSTRUCTIONS FOR USE ........................................................ 23
CARE .......................................................................................... 24
3. SAFETY INSTRUCTIONS .......................................................... 25
4. KNOW YOUR APPLIANCE ........................................................ 26
5. BEFORE INSTALLATION........................................................... 26
6. USING THE HOB........................................................................ 27
7. CLEANING AND MAINTENANCE.............................................. 29
8. INSTALLING THE APPLIANCE.................................................. 30
9. GAS CONNECTION ................................................................... 36
10. ADAPTATION TO DIFFERENT TYPES OF GAS ......................38
11. FINAL OPERATIONS FOR GAS APPLIANCES ........................ 40
NSTRUCTIONS FOR THE USER: these contain user advice,
I
description of the commands and the correct procedures for
cleaning and maintenance of the appliance.
INSTRUCTIONS FOR THE INSTALLER: these instructions are
intended for the qualified technician who must perform the installa-
tion, put it into operation and test the appliance.
22
Contents
Advertisement
Table of Contents
Related Manuals for Smeg PS906
Summary of Contents for Smeg PS906
-
Page 1: Table Of Contents
1. INSTRUCTIONS FOR USE ... 23 2. INSTRUCTIONS FOR DISPOSAL – OUR ENVIRONMENTAL CARE ... 24 3. SAFETY INSTRUCTIONS ... 25 4. KNOW YOUR APPLIANCE ... 26 5. BEFORE INSTALLATION... 26 6. USING THE HOB... 27 7. CLEANING AND MAINTENANCE... 29 8. -
Page 2: Instructions For Use
Precautions for use 1. INSTRUCTIONS FOR USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE APPLIANCE. -
Page 3: Instructions For Disposal - Our Environmental Care
Instructions for disposal 2. INSTRUCTIONS DISPOSAL – ENVIRONMENTAL CARE Our product's packing is made of non-polluting materials, therefore compatible with the environment and recyclable. Please help by disposing of the packing correctly. Find the addresses of collection, recycling and disposal centres from your retailer or from the competent local organisations. -
Page 4: Safety Instructions
Safety instructions 3. SAFETY INSTRUCTIONS REFER INSTALLATION INSTRUCTIONS SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILATION FUNCTIONS. IN YOUR INTERESTS AND FOR YOUR SAFETY IT HAS BEEN ESTABLISHED BY LAW THAT THE INSTALLATION AND SERVICING OF ALL ELECTRICAL APPLIANCES IS TO BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. -
Page 5: Know Your Appliance
Instructions for the user 4. KNOW YOUR APPLIANCE Auxiliary Burner (AUX) Rapid Burner (R) Ultra-rapid Burner (URP) 5. BEFORE INSTALLATION Do not discard packing in the home environment. Separate the various waste materials and take them to the nearest special garbage collection centre. -
Page 6: Using The Hob
Instructions for the user 6. USING THE HOB Gas hob Before lighting the hob burners check that the flame diffuser rings are correctly in place with their respective burner caps, making sure that the holes A in the flame diffusers are aligned with the plugs and thermocouples. -
Page 7: Instructions For The User
Instructions for the user Practical tips for using the burners For better burner efficiency and to minimise gas consumption, use pans with a flat, smooth base and a lid that have a suitable size for the burner, thus avoiding that the flames reach the sides of the pan (see point "6.3 Pan diameters"). -
Page 8: Cleaning And Maintenance
Instructions for the user 7. CLEANING AND MAINTENANCE NEVER USE A JET OF STEAM FOR CLEANING THE APPLIANCE. Before performing any operations requiring access to powered parts, switch off the power supply to the appliance. Cleaning stainless steel To keep stainless steel in good condition it should be cleaned regularly after use. -
Page 9: Installing The Appliance
Instructions for the installer 8. INSTALLING THE APPLIANCE Positioning in the counter top This is a class 3 appliance. The following operation requires building and/or carpentry work, therefore it must be carried out by a skilled technician. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they are heat resistant (T 90°C). - Page 10 Instructions for the installer To fix the hob solidly to the counter top use the 10 supplied brackets, tightening their screws to lock the product firmly in position. The following figures show how to attach these brackets to the lower casing of the product.
- Page 11 Instructions for the installer 8.1.2 Fixing to the electric model support structure Create an opening in the counter top with the dimensions shown in the figure, keeping a minimum distance of 50 mm from the rear edge. The lower part of the casing must be fully accessible after the appliance has been installed.
- Page 12 Instructions for the installer To fix the hob solidly to the counter top use the 10 supplied brackets, tightening their screws to lock the product firmly in position. The following figures show how to attach these brackets to the lower casing of the product.
- Page 13 Instructions for the installer Important: other types of installation are possible if supervised by the manufacturer. Important: for fixing this appliance to the support structure, you are advised not to use mechanical or electrical screwdrivers and to exert moderate pressure by hand on the mounting parts. Important: for fixing the appliance, use the supplied brackets in all the fixing points.
- Page 14 Instructions for the installer If a plug and socket connection is being used make sure that the plug and socket are compatible. Avoid use of adapters and shunts as these could cause overheating and burns. Operation at 220-240 V~: use a three-core cable type...
-
Page 15: Gas Connection
Instructions for the installer 9. GAS CONNECTION Before installation, make sure that the local distribution conditions (nature and pressure of the gas) and the state of regulation of the appliance are compatible. Connection to the gas supply network can be made using a rigid copper hose or a flexible steel hose with a continuous wall and in compliance with the guidelines established by the standard UNI-CIG 7129. - Page 16 Instructions for the installer Room ventilation The appliance may only be installed in permanently ventilated rooms, as specified by the standard UNI-CIG 7129 / 7131. In the room where the appliance is installed, there must be an adequate air flow to meet the requirements of normal gas combustion and the necessary ventilation of the room itself.
-
Page 17: Adaptation To Different Types Of Gas
Instructions for the installer 10. ADAPTATION TO DIFFERENT TYPES OF GAS Before carrying out the following operations, disconnect the appliance from the electricity supply. The appliance is tested for natural gas G20 (2H) at a pressure of 20 mbar. In the case of operation with other types of gas the burner nozzles must be changed and the minimum flame adjusted on the gas taps. -
Page 18: Burner And Nozzle Characteristics Table
Instructions for the installer 10.2 Burner and nozzle characteristics table ATED HEATING Burner CAPACITY Auxiliary (1) 1.05 Rapid (2) Ultra-rapid int. (3) Ultra-rapid ext. (4) ATED HEATING Burner CAPACITY Auxiliary (1) 1.05 Rapid (2) Ultra-rapid int. (4) Ultra-rapid ext. (4) To identify the burners on your cooker hob, refer to the drawings in point "4. -
Page 19: Final Operations For Gas Appliances
Instructions for the installer 11. FINAL OPERATIONS FOR GAS APPLIANCES After making the adjustments described above, reassemble the appliance by following the instructions in point "10.1 Replacement of nozzles on the cooker hob" in reverse order. After adjustment with a gas other than the preset one, replace the label on the casing of the appliance with the label corresponding to the new gas.