SpectraLink SVP010 Technical Bulletin

SVP Administration when Password is lost or Unknown
Date:
Software Versions:
Hardware Revisions:
Product Type:
Access Level:
Description
If you have changed your login password on a NetLink SVP Server, or have forgotten
what the password is, it is still possible to gain access to some limited functionality of
the gateway in order to change the password back.
Setup
On a VT100 Terminal, run a terminal emulation program, such as HyperTerminal
Connect your terminal to the RS-232 port using a null-modem cable. For more
information on how to connect to the gateway, refer to the NetLink SVP Server
Installation, Setup, and Maintenance manual. The normal process of logging in consists
of entering "admin" as the login and password in lower case letters as follows;
login: admin
password: admin
However, for more security, you do have the ability to change the password using the
Change Password option under the main menu.
THE INFORMATION PROVIDED IN THE SPECTRALINK TECHNICAL BULLETIN IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. NO
OBLIGATION OR LIABILITY WILL ARISE OUT OF, SPECTRALINK RENDERING TECHNICAL OR OTHER ADVICE OR SERVICE IN CONNECTION
SpectraLink Corporation • 5755 Central Avenue • Boulder, Colorado 80301 • 303.440.5330
June 07, 2004
All
All
NetLink SVP Servers
General
HEREWITH.
Technical Bulletin CS-04-06
Originator:
Approvers:
Status:
Revision:
Matt Jerger
Wayne McAllister
Gary Bliss
Approved
A
TM
.