Assembly Part A - Darwin Fitness FB90 Assembly Instructions Manual

2.6

Assembly Part A

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Main Tube and Back Bottom Frame
Fix the main tube (1) to the back bottom frame (2) by using two M10*80 bolts (10), four φ10 washers
(11) and two M10 nuts (12).
15