Assembly Part D - Darwin Fitness FB90 Assembly Instructions Manual

2.8

Assembly Part D

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Catcher and Main Frame
Fix the bar catcher (1) to the main frame (2) by using two M10*75 bolts (4), four φ10 washers (5) and
two M10 nuts (6).
26
FB90